print
 



Practical quick tension release lever (Ideal for frequent inside cuts).





The DSH/E is equipped with a vacuum-adapter, which makes it easier to keep your work area clean and dust-free.

Scroll Saw DSH/E

This is the perfect machine for scroll saw relief projects, intarsia, precision mechanics, model building, toy and puzzle making, designs, architectural models, and restoration of antiques. Also, ideal for schools and training centers.

Even with its superior cutting abilaty, the DSH/E emits only a quiet hum while cutting wood up to 50mm (1 1/2"), plastic up to 30mm (13/16"), and non-ferrous metals up to 10mm (13/32"). The DSH/E also cuts effortlessly plexiglass, fiberglass, foam, leather, or cork. The free swinging saw blade holder takes standard saw blades with pin ends. However, blades without pin ends may also be clamped safely by means of a toggle screw. The slender saw arm allows for a clear view to the back of work piece, and a quick tension release lever (Fig. 1) is ideal for frequent inside cuts. The dust blower with adjustable nozzle ensures clear sight of the work piece and cutting line.

The machine base is made from solid cast iron with rubber feet minimizing vibrations (may also be bolted down). The table is extremely stable with a large work area of 14 5/32" x 10 1/2" (360 x 270mm) and can be tilted 45° for miter cuts (Fig. 2). Vacuum cleaner and dust extractor are side-mounted allowing for a dust-free environment. The machine comes with 5 coarse and 5 fine saw blades each.

    


Technical data:

Volts

110 - 120V AC, 50/60Hz

Motor

200W powerful special motor with electronic speed control keeping stroke speed constant under any load

Speeds

200 - 1,400 strokes/min.

Stroke length

3/4" (19mm)

Throat

15 3/4" (400mm)

Cutting depth

2" (50mm), 1" (25mm) at 45° bevel

Overall dimensions

L 21" (53cm), W 10.5 (27cm), H 12" (30cm)

Weight:

44 lb (20kg)


NO 37 090



Standard Scroll Saw Blades with pin ends, 5" (127mm).



Coarse pin end blades (10 TPI)
Ideal for cutting soft and hard wood, plastics as well as other soft and above all also thicker materials.
NO 28 740     6 blades

Fine pin end blades (18 TPI)
Ideal for cutting soft and hard wood, as well as other thinner materials and plastics.
NO 28 742     6 blades

Very fine pin end blades (25 TPI)
Ideal for cutting non-ferrous metals, plastics, fiberglass, acrylics and wood.
NO 28 744     6 blades



"Super-Cut" Scroll Saw Blades without pins, 5 1/16" (130mm).


Ideal for cutting soft and hard wood, fiberglass, plexiglass and soft non-ferrous metals.


Coarse-toothed blades (14 TPI)
NO 28 110     6 blades

Normal-toothed blades (17 TPI)
NO 28 108     6 blades

Fine-toothed blades (25 TPI)
NO 28 107     6 blades


For hard materials like iron or PERTINAX.


Fine-toothed blades (28 TPI)
NO 28 104     6 blades

Extremely fine-toothed blades (41 TPI)
NO 28 106     6 blades



Spiral Saw Blades, 5/64" (125mm).
With plain ends (without pins).



Spiral saw blades provide teeth all the way around and thus allow for cutting in all directions without the need to turn the work piece. This is advantageous, especially with bigger work pieces. The saw blade fits through a 1/16" (1.5mm) hole.

NO 28 746          6 blades




More useful tools:
Bench Circular Saw KS 115