Balanced special motor 230V. For mains operation. Powerful, quiet and long-lasting.


Cylinder sander WAS/E

For perfect surface fine-finishing even where space is tight. For grinding, brushing, satin-finishing as well as cleaning of steel, non-ferrous metal and especially stainless steel.

Planetary gear in die-cast aluminium housing. Continuously variable speed control (full-wave electronics) for low and constant speeds even under high grinding pressure. With start-up equipment for immediate use: one satin-finishing cylinder "medium" and each one grinding mop cylinder 120 grit and 240 grit are included in the scope of delivery.

Technical data:
230V. 50/60Hz. 100W. Spindle speeds 800 - 2,800/min. Length 270mm. Weight 900g. Insulated to class 2.

NO 28 560

See us on YouTube!



Grinding mop cylinder for cylinder sanders WAS/E and WAS/A
For cleaning, grinding and stock removal on flat surfaces. Flapwheels of standard corundum are elastic and adapt to the contours of the work piece. For reaching also hard-to-access areas. Ø 50mm, width 30mm.



NO 28 562120 grit, 2 pcs.
NO 28 563240 grit, 2 pcs.


Satin-finishing cylinder (fleece) for cylinder sanders WAS/E and WAS/A
For cleaning, matting and satin-finishing of metal, non-ferrous metal and especially stainless steel. Ø 50mm, width 30mm.



NO 28 565medium, 2 pcs.

The heart of our MICROMOT precision tools for 230V!

A comparatively more expensive direct current (DC) special motor with permanent magnet technology.

In relation to its size, the permanent magnet technology makes it very powerful, quiet and long-lasting. Due to its very high efficiency, this motor requires considerably less power for the same power output from the socket outlet than other commonly used motors.

Of course, when utilizing these motors our first concern is to produce small, slender tools with high performance. The outstanding ratio of current consumption:power output also contributes significantly to energy saving, thereby also protecting our environment !