Usefull helper for the workbench! Ideal for Drill Stands MB 140/S and MB 200. Also for Bench Drill TBM 115.
- One set (two pieces) of step clamps are included.
- Table size 7 7/8" x 2 3/4" (200 x 70mm) with 3 longitudinal T-slots.
- Adjustable dials are graduated in 0.05 mm increments (1 revolution = 1.0mm, 1 pitch line = 0.05mm feed).
- An adjustable ruler facilitates positioning of the cross slide.
One set (two pieces) of step clamps are included.
Table size 7 7/8" x 2 3/4" (200 x 70mm) with 3 longitudinal T-slots.
Adjustable dials are graduated in 0.05 mm increments (1 revolution = 1.0mm, 1 pitch line = 0.05mm feed).
An adjustable ruler facilitates positioning of the cross slide.
For precise milling, boring, drilling or grinding operations as well as positioning.
This high-precision cross slide table is the optimal attachment when working with the MICROMOT Drill Stands MB 140/S and MB 200, the Bench Drill Machine TBM 115 or the Machine Vice MS 4. Clamping accessories for easy attachment on or below the above items come with the table. Of course, the table can also be used with other Drill Stands or Drill Presses.
The table is made from surface-treated aluminum, has three longitudinal T-slots and provides dual axes (lateral & cross) positioning via two hand wheels. The hand wheels have zero-resettable dials graduated in 0,05mm increments (1 complete revolution of the hand wheel = 1.0mm, 1 pitch line = 0.05mm feed). One set of step clamps is included.
Other technical data:
Table size: 7 7/8" x 2 3/4" (200 x 70mm), with 3 T-slots in size 15/32" x 15/64" x 13/64" (12 x 6 x 5mm), distance from center-to-center 63/64" (25mm). X-travel 5 9/32" (134mm), Y-travel 1 13/16" (46mm). Overall height: 1 11/16" (43mm).
NO 27 100
California Residents Prop 65 Information
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Step clamps steel made
Included in the compound table but can be ordered separately (2 step blocks and clamps, T-slot nuts of MICROMOT standard, bolts). This set also fits the Mill/Lathe System PD 230/E and FF 230, secures objects to approx. 0.7".
NO 24 256
Dividing Attachment for MICRO Mill MF 70 and MICRO Compound Table KT 70
This dividing attachment has been especially designed for use with the MICRO Compound Table KT 70 which is identical to the X-Y table of the MICRO Mill MF 70. All provided fixing holes match the slot distance of the above items, so that it can be mounted in no time with the included clamping parts either standing or lying on the table. When using it standing upright, also long work pieces can be worked on, as they can be pushed through a hole provided in the base plate. In wooden box with sliding lid.
NO 24 264