Bits and cutters of industrial and dental quality: Cutting Discs.

For wood, steel, stainless steel: Cutting Discs



 



NO 28 808



NO 28 809



NO 28 818



NO 28 819

Aluminium Oxide with reinforcement

The cutting discs are available in 22 x 0.8 and 38 x 1mm (7/8" or 1 1/2" x 1/32"). Nearly unbreakable, making it usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals, and even wood and plastics. Mandrel Ø 2.35mm (3/32").



NO 28 810



NO 28 812



NO 28 820



NO 28 821

Cut-Off Wheels

Synthetic resin bonded aluminum-oxide cut-off wheels for cutting metal, non-ferrous metal, alloys, stainless steel, wood, plastics and some softer stones. Note: The cut-off wheel is designed for cutting on its outside edge only! Do not use the face of the wheel for grinding! All mandrel shanks Ø 2.35 mm (3/32"). Wheels in 22 or 38 x 0.7 mm (7/8" x 1/32" or 1 1/2" x 1/32").


NO 28 830

Metal Cutting Blades

Spring steel metal cut-off blades for cutting non-ferrous metals, plastic and wood. Ideal for model-building. Wheel: each one Ø 16, 19, 22mm (5/8", 3/4" and 7/8"), 0.1mm thick, shank of mandrel: Ø 2.35mm (3/32").

For glass, ceramics, plastic: Diamond Tools




NO 28 844



NO 28 846

Diamond-Coated Cutting Discs with cooling holes

For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm (3/32").



NO 28 840



NO 28 842

Diamond Cut-Off Wheels

For cutting very hard and brittle materials. Only 0.6mm (3/128") thick, wheel Ø 20mm (13/16") or 38mm (1 1/2"), shank of mandrel: Ø 2.35mm (3/32").

California Residents Prop 65 Information


WARNING:
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.