Print

Save

MICRO-Driver packaged in a practical zipper case.




MICRO-Driver, 13-piece

Packaged in a practical zipper case for safe storage in the workshop or on the way.

Blades of high alloy nickel-chrome-molybdenum (SAE 8660) for maximum hardness and toughness. Chromed with burnished tip. The ergonomically formed 2-component plastic handles are oil and impact resistant. The revolving top and finger mould improve ease of use. One tweezer for gripping small screws and small parts.

One MICRO-driver of each
Flat-blade: 1 x 50 - 2 x 50
Phillips: PH 000 x 50 - PH 0 x 50 - PH 1 x 50
TX: 5 x 50 - 6 x 50 - 7 x 50 - 8 x 50 - 10 x 50
HX: 1.5 x 50 - 2 x 50

NO 22 720

Manufactured using most modern production technology in the world's largest cold forging hand tool factory.

The ratchet - the key item:
Made from CrV steel in one single piece. Hardened and with perfect toothing: several of the 52 teeth engage simultaneously for transmitting extremely high torque. Quick release mechanism: releasing sockets at the push of the button. Optimum surface protection: twice nickel plated then chromed in matt finish. Non-detachable handle made from oil and acid-resistant TPR (thermoplastic rubber) with hanging hole.


The PROXXON driver system:
The driving force is applied to the flanks, not the corners. This ensures high power transmission without damaging the corners of the nut or bolt.



Screwdriver bits:
With CrV socket .
The drive bits are all an optimum combination of chrome-siliconmanganese-molybdenum steel .


All bits and accessories are forged using 31CrV steel. High carbon content to ensure consistent hardness. Deep, uniform forging is fully guaranteed on the hex. drive side to ensure that protruding studs do not present a problem. Thin-wall construction for better access while maintaining strength for heavy work. Lead-in chamfer allows socket to slide over nuts easily. Machined fits on drive square allow ratchet to arrest properly. Beginning with the 19mm size the outer diameter of the sockets is reduced on the drive square end for improved handling . Optimum surface protection: Double nickel-plating and single mattfinished chrome-plating.


Socket sizes easy to read due to laser marking!