- 250mm-sanding disc machined with diamond tools. Double ball bearing.
- Table size: 275 x 105mm with slot for mitre gauge and tilts up to 45°.
250mm-sanding disc machined with diamond tools. Double ball bearing.
Table size: 275 x 105mm with slot for mitre gauge and tilts up to 45°.
Disc sander TSG 250/E
Sands long edges, end sections, radii, mitres, and, by turning the workpiece over - accurate flat surfaces at right angles.
Used on soft and hard woods, non-ferrous metals, steel, plastics (perspex and PC cards), cork and rubber. A simple chart indicates the recommended speeds on different materials.
Main body of ribbed die-cast aluminium (no steel tube or sheet metal construction). Turned flat grinding disc, provided with silicone film: This ensures that affixed sanding discs can be removed effortlessly after use. Two additional square silicone films for storage and reuse of used sanding discs are included. With dust collection adapter for connection to a vacuum cleaner for dust-free working. Complete with mitre gauge and 2 each sanding discs in grain 80 and 240.
230V with drive via Optibelt toothed belt (reduction ratio 7.3:1). Electronic speed control approx. 250 - 750m/min. Disc diameter 250mm. Maximum sanding height 135mm, table 275 x 105mm (tilts 15° in, 45° out). Overall size without table 330 x 280 x 230mm. Weight 7kg.
NO 28 060
Equipped with suction connection and adapter for dust-free, clean sanding. We recommend our Compact Workshop vacuum cleaner CW-matic with integrated automatic switch control. The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.
Accessories for the disc sander TSG 250/E
Self-adhesive corundum sanding discs for TSG 250/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastic, cork, rubber and minerals. Ø 250mm. Includes silicone film for storing used sanding discs.
|NO 28 970||80 grit||5 discs|
|NO 28 972||150 grit||5 discs|
|NO 28 974||240 grit||5 discs|
Self-adhesive silicone carbide sanding discs for TSG 250/E
For sanding non-ferrous metals, steel, glass, PC cards, plastics and ceramics.
Ø 250mm. Includes silicone film for storing used sanding discs.
|NO 28 976||320 grit||5 discs|
Self-adhesive silicone film for easy sanding disc removal
For retrofitting older disc sanders TG 250/E (production before 2007 with serial no. up to 14190). The film needs to be placed on the aluminium sanding disc and ensures easy removal of sandpaper discs after use. With 4 square silicone films for storage of used sanding discs and re-use when needed.
|NO 28 968||set|
Tellerschleifgerät TG 125/E