Unsurpassed versatility due to its long, slim head of die-cast aluminium. Made in Europe.
Long neck angle grinder LHW
For working steel, non-ferrous metals, glass, ceramics, wood and plastic.
For cutting, rough-machining, grinding and carving wood. Special balanced, powerful, quiet and long-lasting DC motor. Stable head made of glass-fibre reinforced POLYAMIDE. A corundum grinding disc (grit 60), a fan sanding disc (grit 100) and a reinforced cutting disc are included. Safely stored in an attractive and extremely stable case made from polypropylene.
The heart of our MICROMOT precision tools for 230V: the direct current (DC) special motor.
For any job on the workbench we recommend the use of our mains-connected tools. They are light-weight, easy to handle (shorter) and not limited as to time of operation.
Technical data:
230V. 100W. 15,000rpm. Disc diameter 50mm with 10mm interval. Length 270mm. Weight 550g. Run down time less than 1 second. Insulated to class 2.
NO 28 547
Storage case of high-grade polypropylene. Attractive design, very sturdy and large enough to put the machine back in the case after completing work, without having to "fumble". A label on the side identifies the contents.
Accessories for long neck angle grinder LHW
Coarse cleaning disc
Abrasive fleece, used for cleaning, paint, rust and scale removal of metallic surfaces. For preparation of welding spots. Ø 50mm.
NO 28 5536 pieces
Corundum grinding disc for LHW
Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals. Ø 50mm.
NO 28 58560 grit
Silicon carbide grinding disc for LHW
Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.
NO 28 58760 grit
Corundum fan sander for LHW
For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.
NO 28 590100 grit
NO 28 591240 grit
Corundum bound cutting disc for LHW
With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.
NO 28 1555 pieces
Diamond-coated cutting disc
For fine cuts in hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 0.6mm. With 10mm bore.
NO 28 558
Diamond-coated cutting and roughing disc
For cutting, grinding and roughing of hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 1mm. With 10mm bore.
NO 28 557
Backing disc for LHW
Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.
NO 28 5481 piece
Corundum sanding disc for LHW
Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.
| NO 28 549 | 80 grit | 12 pieces | ||
| NO 28 550 | 150 grit | 12 pieces |
Sanding fleece for LHW
Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.
| NO 28 554 | medium | 5 pieces | ||
| NO 28 555 | fine | 5 pieces |
Tungsten carbide cutting disc
Less heating up due to cooling holes. For cutting wood (especially wooden floors) and jointing mortar. Ø 50mm.
NO 28 556
Tungsten carbide rasp- and cutting disc
High stock removal in wood and soft materials. Cranked design for convenient shaping and modelling in wood, gypsum and horn (animal hooves). Less heating up due to cooling holes. Ø 50mm with 10mm bore.
NO 28 559
Rasp plate with metal burrs made from tungsten carbide for LHW
For model-making, cleaning and smoothing of wood, plastics and glass-fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processing.
NO 29 050
A comparatively more expensive direct current (DC) special motor with permanent magnet technology.