Brushless motors and advanced power electronics: Maximum performance in a compact design!
Longneck angle grinder LHW/BL 
- For precise cutting right into corners with a cutting depth of 14mm.
- Unsurpassed versatility thanks to longneck gear head made of die-cast aluminum.
NO 29 202
Accessories for long neck angle grinder LHW, LHW/A and LHW/BL
Backing disc
Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.
NO 28 5481 piece
Sanding & Grinding
Corundum sanding disc
Self-adhesive type, used on flat and convex surfaces. Ø 50mm. Supplied without backing pad.
| NO 28 549 | 80 | grit | 12 pieces | |
| NO 28 550 | 150 | grit | 12 pieces |
Sanding fleece
Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Supplied without backing pad.
| NO 28 554 | medium | 5 pieces | |
| NO 28 555 | fine | 5 pieces |
Coarse cleaning disc
Abrasive fleece, used for cleaning, paint, rust and scale removal of metallic surfaces. For preparation of welding spots. For preparation of welding spots. Ø 50mm.
NO 28 5536 pieces
Corundum grinding disc
Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals. Ø 50mm.
NO 28 58560 grit
Silicon carbide grinding disc
Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.
NO 28 58760 grit
Corundum fan sander
For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.
NO 28 590100 grit
NO 28 591240 grit
Diamond-coated flap disc
Straight edge for clean corner-cuts. High stock removal in granite, marble, stoneware and other ceramic materials. Ø 50 mm. 2 pieces.
| NO 28 166 | 60 | grit | 2 pieces | |
| NO 28 167 | 120 | grit | 2 pieces | |
| NO 28 168 | 200 | grit | 2 pieces |
Diamond sanding disc
For sanding and polishing cutting edges and chamfers. Also for breaking edges beforehand and creating clean chamfers. For porcelain stoneware, natural stone (granite, marble), ceramic materials, glass. Self-adhesive. Ø 50 mm. 6 pieces.
| NO 28 675 | 120 | grit | 6 pieces | |
| NO 28 676 | 200 | grit | 6 pieces | |
| NO 28 677 | 400 | grit | 6 pieces |
Set of diamond sanding discs
One disc each of grit 60 - 120 - 200 - 400 - 800 - 1500 - 3000. Including one foam backing pad.
| NO 28 679 |
Cutting
Corundum bound cutting disc
With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.
NO 28 1555 pieces
Diamond-coated cutting disc UNI Cut 50
Fast, thin, clean cuts. All-rounder. For porcelain stoneware, natural stone (granite, marble), ceramic materials, glass. With surface diamond coating (10mm). Thickness 0.9mm.
NO 28 156
Diamond-coated cutting disc with Turbo Rim
For extremely fast cuts and extraordinary durability in granite, marble, stoneware and ceramic materials. Also for cutting corner protection profiles without tempering colours. Thickness 1.7mm. Ø 50mm.
NO 28 157
Diamond-coated fine cutting disc
For very thin, precise and short cuts in ceramic materials and glass. Thickness 0.8mm. Ø 50mm.
NO 28 158
Diamond-coated cutting disc
For fine cuts in hard materials such as glass, porcelain, ceramics and tiles. Less heating up due to cooling holes. Thickness 1.2mm. Ø 50mm.
NO 28 558
Diamond-coated cutting and roughing disc
For cutting, grinding and roughing of hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Thickness 2.1mm. Ø 50mm.
NO 28 557
Tungsten carbide cutting disc
Less heating up due to cooling holes. For cutting wood (especially wooden floors) and jointing mortar. Thickness 1.3mm. Ø 50mm.
NO 28 556
Tungsten carbide rasp- and cutting disc
Rasp plate with metal burrs made from tungsten carbide
A comparatively more expensive direct current (DC) special motor with permanent magnet technology.