Flexibility in cutting styrofoam board. No "crumbling" as when working with knife or saw.
Hot Wire Cutter THERMOCUT 650
Flat support surface and lateral bore with the included c-clamp allow stationary use.
Telescopic arm for adjustable cutting lengths from 400 - 650mm (15 3/4" - 25 1/2"). Cutting depth (throat capacity) 200mm (7.9").
Spring element in support bracket ensuring constant wire tension regardless of temperature based wire expansion.
For architects, designers, artists, in prototype construction, insulation work and, not least, for classical model building (railroads, airplanes, boats).
For cutting styrofoam, hard foam, polyurethane, PU foam and thermoplastic materials. Switch-mode power supply for 110 - 120V AC connection. The heating element is operated with a safety voltage of max. 40V and 1.2A. Depending on the material the cutting wire temperature is pre-selected using the practical control knob and remains stable while working. Supporting surface with lateral bore for fixing a c-clamp to allow for stationary use. A c-clamp and a spool with 30m (98ft) of cutting wire Ø 0.2mm are included in the scope of delivery.
110 - 120V. AC 50/60Hz. 50W. Secondary voltage max. 40V, 1.2A. Cutting temperature of wire Ø 0.2mm (0.008") continuously variable from 100 - 350 °C (210 - 660 °F). Weight 850g (1.9 lbs). Insulated to Class 2.
NO 37 084
California Residents Prop 65 Information
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Flat support surface and lateral bore with the included c-clamp allow stationary use.
- Telescopic arm for adjustable cutting lengths from 400 - 650mm (15 3/4" - 25 1/2"). Cutting depth (throat capacity) 200mm (7.9").
- Spring element in support bracket ensuring constant wire tension regardless of temperature based wire expansion.
For cutting styrofoam or hard foam hot wire cutters are vastly superior to other tools such as knives or saws. Most important is to select the right temperature depending on material and thickness. With a bit of patience and practice anyone can do this! Most precise cutting results are usually achieved at medium temperatures and moderate pressure.
Flat support surface and lateral bore to fix a screw clamp allow also stationary use. Practical when cutting standard styrofoam boards (100 x 50cm).
Heißdraht-Schneidegerät THERMOCUT 12/E