Cuts aluminium, wood, PC cards and plastics with standard scroll saw blades. Controllable stroke rate.
Scroll Saw DS 115/E
Adjustable patented head offers numerous advantages:
The lifetime of the saw blade is tripled after shortening it twice (teeth in the middle part of the saw blade are finally used, too).
With the head in the lowest position, working with a blade shortened to 2 23/64" is even more precise.
This is the ideal machine for
the delicate project: model building, toy manufacturing and precision work.
It cuts soft wood (e.g. bass wood) up to 1 3/16" (30mm), hard wood up to approx. 25/64" (10mm), plastic (including circuit boards) up to approx. 5/32" (4mm) and nonferrous metals up to 5/64" (2mm) with standard scroll saw blades. The machine has a very stable ribbed die-cast aluminum saw frame with 11 13/16" (300mm) throat. The blade guide is equipped with an integrated blower.
The machined worktable of die-cast aluminum has a size of 6 19/64" x 6 19/64" (160 x 160mm) and is equipped with an adjustable longitudinal stop and graduated miter gauge (0 - 90°). The ABS plastic body provides a very practical sliding door on the right side of the housing for the removal of saw dust. The saw is powered by a 110 - 120V motor (85W) for prolonged use, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 - 2,500strokes/min.
NO 37 088
California Residents Prop 65 Information
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Adjustable patented head offers numerous advantages:
- The lifetime of the saw blade is tripled after shortening it twice (teeth in the middle part of the saw blade are finally used, too).
- With the head in the lowest position, working with a blade shortened to 2 23/64" is even more precise.
The vacuum cleaner adapter helps keep the work area cleaner.
"Super-Cut" Scroll saw blades
High quality steel for extended use and prolonged cutting capacity.
Standard version without pin.
Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Coarse-toothed blades, No. 9: 14 TPI
NO 28 116 5.1"x1/16"x1/52" (130x1.50x0.48mm) 12 pces
Standard-toothed blades, No. 5: 17 TPI
NO 28 117 5.1"x3/64"x1/64" (130x1.20x0.38mm) 12 pces
Fine-toothed blades, No. 3: 20 TPI
NO 28 118 5.1"x1/32"x1/64" (130x0,77x0.34mm) 12 pces
Hard materials such as steel and PERTINAX.
Standard-toothed blades, No. 5: 36 TPI
NO 28 112 5.1"x1/32"x1/64" (130x0.85x0.4mm) 12 pces
Fine-toothed blades, No. 3: 41 TPI
NO 28 113 5.1"x1/32"x1/64" (130x0.75x0.36mm) 12 pces
Very fine-toothed blades, No. 1: 50 TPI
NO 28 114 5.1"x1/32"x1/64" (130x0.6x 0.3mm) 12 pces