The new Cordless tools made in Europe: Strong problem solvers for craft and industry – for professional use!

Cordless Long Neck Angle Grinder LHW/A

For working on steel, non-ferrous metal, glass, ceramics, wood and plastic. For cutting, roughing and grinding.

Supplied with corundum grinding disc (60 grit), fan sander (100 grit) and reinforced cutting disc. Set includes lithium-ion battery Li/A2 (10.8V) and rapid battery charger LG/A.

The LHW/A is top-quality and its performance is comparable to our mains-powered counterparts. For outdoor jobs or if an extension lead needs to be used, this tool is very utile.

Technical data:
10.8V. 5,000 - 16,000rpm. Discs Ø 50mm (2") with 10mm (13/32") bore. Length 320mm (12.6") . Weight approx. 800g (1.8 lbs) (including battery).

NO 39 815

See us on YouTube!

California Residents Prop 65 Information

This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

The LHW/A comes safely packed in a practical, attractive and super-sturdy plastic case made from high-quality PP. A product label on the side of the case details its contents.

Cordless Long Neck Angle Grinder LHW/A
As described above, also including listed accessories. But without battery and rapid charger. Packed in a cardboard box.

NO 29 817

Video LHW/A

  • High quality 10.8V lithium-ion battery with 2.6Ah for highest performance.
  • One battery charge allows for at least 30 minutes of use even at maximum power. No other cordless tool lasts longer in this class!
  • Gear head of die-cast aluminium. Main housing of glass-fibre reinforced POLYAMIDE with soft component in grip area.
  • With continuously variable speed control and special balanced DC motor: powerful, quiet and durable.

The flat end cap of the battery enables the tool to stand upright as well.

The MICROMOT lithium-ion battery system: One battery and one rapid charger for four professional tools:

Four power tools - one system!

Rapid Battery Charger LG/A2
Charges the PROXXON lithium-ion battery Li/A2 in one hour. With integrated temperature control. LED signal light: Yellow = charging, Green = charged.

Technical data:
Input 100 - 120V AC, 50/60Hz. Output 12.6V, 2A. Weight approx. 340g (0.75 lbs).

NO 39 880

Lithium-ion Battery Li/A2
For long and durable powerful operation of our MICROMOT cordless tools. With integrated temperature control for safe operation.

Technical data:
Voltage 10.8V. Capacity 2.6Ah. Length 85mm. Weight 180g (0.4 lbs).

NO 29 896

Accessories for the Cordless Long Neck Angle Grinder LHW/A

Corundum Grinding Disc
Ideal for grinding, deburring, sharpening, rust removal and roughing of steel and non-ferrous metal.

NO 28 58560 grit

Silicon-Carbide Grinding Disc
Ideal for grinding, deburring, sharpening, rust removal and roughing of stone, glass, ceramics and other very hard materials.

NO 28 58760 grit

Flap Discs
The flap disc is made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing of cast iron, gray cast iron, stainless steel, steel, non-ferrous metal, wood and plastic.

NO 28 590100 grit
NO 28 591240 grit

Cut-off wheel
Ideal for cutting steel, non-ferrous metals, smaller plastic and wooden bars.

NO 28 155set of 5

Diamond-coated cutting disc
For fine cuts in hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 0.6mm. With 10mm bore.

NO 28 558

Diamond-coated cutting and roughing disc
For cutting, grinding, and roughing of hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 1mm. With 10mm bore.

NO 28 557

Backing Disc
Hook and loop type, for use with sanding discs and sanding fleece.

NO 28 548

Corundum Sanding Discs
Hook and loop type, used on flat and convex surfaces.

NO 28 549   80 grit   set of 12
NO 28 550   150 grit   set of 12

Sanding Fleece
Hook and loop type, used for cleaning, matting and sanding of steel, stainless, steel, non-ferrous metals. Also used for paint removal.

NO 28 554   medium   set of 5
NO 28 555   fine   set of 5

Tungsten carbide rasp- and cutting disc
High stock removal in wood and soft materials. Cranked design for convenient shaping and modelling in wood, gypsum and horn (animal hooves). Less heating up due to cooling holes. Ø 50mm with 10mm bore.

NO 28 559

Disc with tungsten carbide burrs
Carving wheel with needle-like tungsten carbide teeth. Ideal for carving and sculpting, roughing and finishing in wood plastics and fiberglass. Smooth cutting and excellent control. Maximum RPM 15,000. Do not use on metal.

NO 29 050

Passendes Zubehör:
Fußschalter FS

The heart of our MICROMOT precision tools for 115V is a comparatively more expensive direct current (DC) special motor.

In relation to its size, the permanent magnet technology makes it very powerful, quiet and long-lasting. Due to its very high efficiency, this motor requires considerably less power for the same power output from the socket outlet than other commonly used motors.

Of course, when utilizing these motors our first concern is to produce small, slender tools with high performance. The outstanding ratio of current consumption:power output also contributes significantly to energy saving, thereby also protecting our environment!