With analogue display, micro scale for fine adjustment and self-locking bit adapter.

Self-locking adapter with spring sleeve for 1/4" standard bits is included!
Additional micro scale for fine adjustment: 1 rotation = 1.0Nm, scale ring with 0.10Nm graduation.

MicroClick torque screwdriver MC 5. For 1 to 5 Nm.

Automatic quick-release when tightening screws: Clearly audible and palpable click signal when the selected torque is reached.

Pre-setting of the torque by turning the knurled ring at the end of the handle, fixing it by sliding it into position. Clearly legible scale display. Additional micro scale for fine adjustment: 1 rotation = 1Nm. Scale ring with 0.10Nm graduation. With 1/4" square drive (6.3mm) for holding sockets and self-locking adapter with spring sleeve for holding 1/4" (6.3mm) standard bits in a form fitting manner. Accuracy +/- 6%. Total length 165mm.

Click here for more information

NO 23 347


The MC 5 is a precision tool. It comes in a practical storage box for optimum protection.

  1. Self-locking adapter with spring sleeve for 1/4" standard bits is included!
  2. Additional micro scale for fine adjustment: 1 rotation = 1.0Nm, scale ring with 0.10Nm graduation.




For full
professional use!




Tightening torques for bolt shanks with standard metric threads (DIN 13, Part 13) and head contact dimensions (DIN 912, 931, 934). The coefficient of friction was determined using an untreated and unplated bolt (ungreased, lightly oiled).