Torque screwdriver complement the successful range of our MicroClick precision tools.

Self-locking adapter with spring sleeve for standard bits 6.3mm (1/4") included.
T-handle is included in the scope of delivery.

MicroClick torque screwdriver MC 10. For 2 to 10Nm.

Automatic quick-release when tightening screws: Clearly audible and palpable click signal when the selected torque is reached.

Pre-setting of the torque by turning the knurled ring at the end of the handle (lockable). Clearly legible scale with window. Additional micro-scale for fine adjustment: 1 rotation = 2.0Nm. Scale ring with 0.2Nm graduation. With 1/4" square drive (6.3 mm) for holding sockets and self-locking adapter with spring sleeve for holding 1/4" (6.3mm) standard bits in a form fitting manner. Rear end with 1/4" connector for mounting a T-handle (included in the scope of delivery). Accuracy +/- 6 %. Total length 165mm. Weight approx. 270g.

Click here for more information

NO 23 348


The torque wrench MC 10 is a precision tool. It comes in a practical storage box for optimum protection.


  1. Self-locking adapter with spring sleeve for standard bits 6.3mm (1/4") included.
  2. T-handle is included in the scope of delivery.

Note:
A well-shaped ergonomic screwdriver handle allows for torques from 6 to 8Nm just by manual operation. For higher torques, the MC 10 has a 1/4" square connector on the rear end for fitting a lever (T-handle, ratchet).




Tightening torques for bolt shanks with standard metric threads (DIN 13, Part 13) and head contact dimensions (DIN 912, 931, 934). The coefficient of friction was determined using an untreated and unplated bolt (ungreased, lightly oiled).