Due to its unique oscillating motion also ideal for cutting, where round and rotating saw blades cannot be used.

Delta sander OZI/E

Small yet efficient sander!


Head of die-cast zinc, ensuring exact and stable housing for the moving parts.
Sanding area 65 x 65 x 65mm with gummed pads allows quick changing.


For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. The oscillating motion ensures quiet operation and also facilitates cutting. Insert and file! The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Supplied with an HSS plunge saw blade (width 14mm) and 10 each sanding pads of 80, 150 and 240 grit. In an attractive case.

The heart of our MICROMOT precision tools for 230V: the direct current (DC) special motor.

Technical data:
230V. 80W. Sanding frequency of 5,000 - 12,000rpm. Length 230mm. Weight 550g. Insulated to class 2.

NO 28 520

An HSS plunge saw blade (width 14mm) is included.
For square precision cuts in wood, plastics and aluminium.




Video OZI/E


  1. Head of die-cast zinc, ensuring exact and stable housing for the moving parts.
  2. Sanding area 65 x 65 x 65mm with gummed pads allows quick changing.


The oscillating motion ensures lack of vibration and kickback and allows the fitting of cutting blades too!

Note:
The self-adhesive sanding pads ensure quick changing and optimum usage. Simply remove and rotate through 120° for a fresh corner.



Storage case of high-grade polypropylene. Attractive design, very sturdy and large enough to put the machine back in the case after completing work, without having to "fumble". A label on the side identifies the contents.

Sanding pads for OZI/E
High durability corundum (aluminium oxide) pads. Grain filled with special filler to prevent premature clogging. Deposited on special backing paper. Self-adhesive.

NO 28 891   80 grit   25 pieces
NO 28 893   150 grit   25 pieces
NO 28 895   240 grit   25 pieces



HSS cutting blade for OZI/E
Oscillates, making it ideal for cutting metal, wood, PC cards, plastics, plaster of Paris and many other materials. The segment cut facilitates exact cutting right into corners.

NO 28 900Ø 65mm, 160 teeth


Diamond cutting blade for OZI/E
Operation as described above for the HSS blade. Cuts marble, bricks, dry walling and many other materials. Ideal for interior finishing and sanitary and electrical installation.

NO 28 902Ø 65mm




HSS immersion saw blades for OZI/E
For exact square excavations and other forms. For making hatchways and windows in ship and aircraft models. Cuts wood, plywood, plastics and aluminium. Max. immersion depth 16mm.

NO 28 897 Saw blade width 8mm
NO 28 898 Saw blade width 14mm

Passendes Zubehör:
Fußschalter FS

The heart of our MICROMOT precision tools for 230V!

A comparatively more expensive direct current (DC) special motor with permanent magnet technology.

In relation to its size, the permanent magnet technology makes it very powerful, quiet and long-lasting. Due to its very high efficiency, this motor requires considerably less power for the same power output from the socket outlet than other commonly used motors.

Of course, when utilizing these motors our first concern is to produce small, slender tools with high performance. The outstanding ratio of current consumption:power output also contributes significantly to energy saving, thereby also protecting our environment !