Cordless long neck angle grinder LHW/A
For working on steel, non-ferrous metal, glass, ceramics, wood and plastic. For cutting, roughing and grinding.
With variable electronic speed control for high torque, even in the lower speed range. A corundum grinding disc (grit 60), a fan sander (grit 100) and a reinforced cutting disc are included. Safely stored in an attractive plastic case. Set includes LHW/A, lithium-ion battery Li/A2 (10.8V) and rapid battery charger LG/A2.
The LHW/A is top-quality and his performance is comparable to our mains-powered counterparts. For outdoor jobs or if an extension lead needs to be used, this tool is very useful.
Technical data:
10.8V. 5,000 - 16,000rpm. Discs Ø 50mm with 10mm bore. Length 320mm. Weight approx. 800g (including battery).
NO 29 815
The LHW/A comes safely packed in a practical, attractive and super-sturdy plastic case made from high-quality PP. A product label on the side of the case details its contents.
Cordless long neck angle grinder LHW/A, available individually
As described above, also including the specified accessories. But without battery and without rapid charger. Packed in a cardboard box.
NO 29 817
- High quality 10.8V lithium-ion battery with 2.6Ah for a performance comparable to the mains-powered counterpart.
- One battery charge allows for at least 30 minutes of use even at maximum power. No other cordless tool lasts longer in this class!
- Gear head of die-cast aluminium. Main housing of glass-fibre reinforced POLYAMIDE with soft component in grip area.
- With continuously variable speed control and special balanced DC motor: powerful, quiet and durable.
Practical:
The flat end cap of the battery enables the tools to stand upright as well.
The MICROMOT lithium-ion battery system: Strong problem solvers for craft and industry.
One battery and one rapid charger only for now already eleven professional tools:
Eleven power tools - one system!
Eleven power tools - one system!
Rapid battery charger LG/A2
Charges the PROXXON lithium-ion battery Li/A2 in one hour. With integrated temperature control. LED signal light: Yellow = charging, Green = charged.
Technical data:
Input 100 - 240V, 50/60Hz. Output 12.6V, 2A. Weight approx. 340g.
NO 29 880
Lithium-ion battery Li/A2
For long and durable powerful operation of our MICROMOT cordless tools. With integrated temperature control for safe operation.
Technical data:
Voltage 10.8V. Capacity 2.6Ah. Length 85mm. Weight 180g.
NO 29 896
Accessories for the cordless long neck angle grinder LHW/A
Coarse cleaning disc
Abrasive fleece, used for cleaning, paint, rust and scale removal of metallic surfaces. For preparation of welding spots. Ø 50mm.
NO 28 5536 pieces
Corundum grinding disc for LHW
Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals. Ø 50mm.
NO 28 58560 grit
Silicon carbide grinding disc for LHW
Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.
NO 28 58760 grit
Corundum fan sander for LHW
For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.
NO 28 590100 grit
NO 28 591240 grit
Corundum bound cutting disc for LHW
With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.
NO 28 1555 pieces
Diamond-coated cutting disc
For fine cuts in hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 0.6mm. With 10mm bore.
NO 28 558
Diamond-coated cutting and roughing disc
For cutting, grinding and roughing of hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 1mm. With 10mm bore.
NO 28 557
Backing disc for LHW
Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.
NO 28 5481 piece
Corundum sanding disc for LHW
Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.
| NO 28 549 | 80 grit | 12 pieces | ||
| NO 28 550 | 150 grit | 12 pieces |
Sanding fleece for LHW
Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.
| NO 28 554 | medium | 5 pieces | ||
| NO 28 555 | fine | 5 pieces |
Tungsten carbide cutting disc
Less heating up due to cooling holes. For cutting wood (especially wooden floors) and jointing mortar. Ø 50mm.
NO 28 556
Tungsten carbide rasp- and cutting disc
High stock removal in wood and soft materials. Cranked design for convenient shaping and modelling in wood, gypsum and horn (animal hooves). Less heating up due to cooling holes. Ø 50mm with 10mm bore.
NO 28 559
Rasp plate with metal burrs made from tungsten carbide for LHW
For model-making, cleaning and smoothing of wood, plastics and glass-fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processing.
NO 29 050